feeder
อุปกรณ์ป้อนชิ้นส่วน
ความหมายและการใช้
อุปกรณ์ป้อน Tape/Reel ให้ Pick-and-Place Machine
ตัวอย่างประโยคที่ใช้คำนี้
Review the model changeover against plan versus actual, quantify the loss in minutes or pieces, and assign a recovery owner with a clear completion time.
ทบทวนModel Changeoverเทียบ Plan กับ Actual ระบุ Loss เป็นนาทีหรือจำนวนชิ้น และกำหนด Recovery Owner พร้อมเวลาปิดที่ชัดเจน
Before the next release, verify the controls for centroid data, rotation, package, and feeder assignment in the placement program.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Centroid, Rotation, Package และ Feeder Assignment ในโปรแกรม Pick & Place
The team is reviewing the controls for centroid data, rotation, package, and feeder assignment as part of the placement program.
ทีมกำลังทบทวนการควบคุมเรื่อง Centroid, Rotation, Package และ Feeder Assignment ซึ่งเป็นส่วนหนึ่งของโปรแกรม Pick & Place
We found a gap in the placement program: one or more controls related to centroid data, rotation, package, and feeder assignment do not match the approved requirement.
เราพบ Gap ในโปรแกรม Pick & Place: การควบคุมบางรายการที่เกี่ยวกับ Centroid, Rotation, Package และ Feeder Assignment ไม่ตรงกับข้อกำหนดที่อนุมัติ
If the placement program is not closed before the next build, the unresolved points around centroid data, rotation, package, and feeder assignment may create a production or quality risk.
หากโปรแกรม Pick & Placeยังไม่ปิดก่อน Build ถัดไป ประเด็นค้างเรื่อง Centroid, Rotation, Package และ Feeder Assignment อาจสร้างความเสี่ยงต่อการผลิตหรือคุณภาพ
We have completed the initial review of the placement program and assigned owners for the remaining actions related to centroid data, rotation, package, and feeder assignment.
เราได้ทบทวนโปรแกรม Pick & Placeเบื้องต้นเสร็จแล้ว และกำหนด Owner สำหรับ Action ที่เหลือเกี่ยวกับ Centroid, Rotation, Package และ Feeder Assignment
Could you clarify how the controls for centroid data, rotation, package, and feeder assignment will be verified and who will approve the placement program?
ช่วยชี้แจงได้ไหมว่าจะ Verify การควบคุมเรื่อง Centroid, Rotation, Package และ Feeder Assignment อย่างไร และใครจะเป็นผู้อนุมัติโปรแกรม Pick & Place
After adjusting the feeder setup, run five boards, compare the SPI/AOI trend with the baseline, and release the line only if the result is stable.
หลังปรับการตั้ง Feeder ให้รัน 5 บอร์ด เปรียบเทียบ Trend ของ SPI/AOI กับ Baseline และ Release ไลน์เมื่อผลเสถียรเท่านั้น
We would appreciate it if you could provide the latest evidence for the placement program, including the status of centroid data, rotation, package, and feeder assignment, by 3 p.m. today.
รบกวนช่วยส่ง Evidence ล่าสุดของโปรแกรม Pick & Place รวมถึงสถานะเรื่อง Centroid, Rotation, Package และ Feeder Assignment ภายในบ่าย 3 โมงวันนี้
Before the next release, verify the controls for program, feeder, stencil, tooling, first piece, and line clearance in the model changeover.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Program, Feeder, Stencil, Tooling, First Piece และ Line Clearance ในModel Changeover