HIC
การ์ดแสดงความชื้น
ความหมายและการใช้
Humidity Indicator Card ใน Dry Pack
ตัวอย่างประโยคที่ใช้คำนี้
Do not release the stencil design until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.
อย่า Release การออกแบบ Stencilจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ
Before the next release, verify the controls for masking, thickness, coverage, bubbles, and curing in the conformal coating.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Masking, Thickness, Coverage, Bubble และ Curing ในConformal Coating
After adjusting the MSL control, run five boards, compare the SPI/AOI trend with the baseline, and release the line only if the result is stable.
หลังปรับการควบคุม MSL ให้รัน 5 บอร์ด เปรียบเทียบ Trend ของ SPI/AOI กับ Baseline และ Release ไลน์เมื่อผลเสถียรเท่านั้น
The team is reviewing the controls for masking, thickness, coverage, bubbles, and curing as part of the conformal coating.
ทีมกำลังทบทวนการควบคุมเรื่อง Masking, Thickness, Coverage, Bubble และ Curing ซึ่งเป็นส่วนหนึ่งของConformal Coating
We found a gap in the conformal coating: one or more controls related to masking, thickness, coverage, bubbles, and curing do not match the approved requirement.
เราพบ Gap ในConformal Coating: การควบคุมบางรายการที่เกี่ยวกับ Masking, Thickness, Coverage, Bubble และ Curing ไม่ตรงกับข้อกำหนดที่อนุมัติ
Before the next release, verify the controls for aperture reduction, thickness, and area ratio in the stencil design.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Aperture Reduction, ความหนา และ Area Ratio ในการออกแบบ Stencil
If the conformal coating is not closed before the next build, the unresolved points around masking, thickness, coverage, bubbles, and curing may create a production or quality risk.
หากConformal Coatingยังไม่ปิดก่อน Build ถัดไป ประเด็นค้างเรื่อง Masking, Thickness, Coverage, Bubble และ Curing อาจสร้างความเสี่ยงต่อการผลิตหรือคุณภาพ
The team is reviewing the controls for aperture reduction, thickness, and area ratio as part of the stencil design.
ทีมกำลังทบทวนการควบคุมเรื่อง Aperture Reduction, ความหนา และ Area Ratio ซึ่งเป็นส่วนหนึ่งของการออกแบบ Stencil
We have completed the initial review of the conformal coating and assigned owners for the remaining actions related to masking, thickness, coverage, bubbles, and curing.
เราได้ทบทวนConformal Coatingเบื้องต้นเสร็จแล้ว และกำหนด Owner สำหรับ Action ที่เหลือเกี่ยวกับ Masking, Thickness, Coverage, Bubble และ Curing
We found a gap in the stencil design: one or more controls related to aperture reduction, thickness, and area ratio do not match the approved requirement.
เราพบ Gap ในการออกแบบ Stencil: การควบคุมบางรายการที่เกี่ยวกับ Aperture Reduction, ความหนา และ Area Ratio ไม่ตรงกับข้อกำหนดที่อนุมัติ