The team is reviewing the controls for paste volume, aperture design, placement, and reflow condition as part of the solder bridging.

PCBA SMT ProcessSolder BridgingB1normal

ทีมกำลังทบทวนการควบคุมเรื่อง Paste Volume, Aperture Design, Placement และสภาวะ Reflow ซึ่งเป็นส่วนหนึ่งของSolder Bridge

แกะรูปประโยค

สถานการณ์ / Intent

Current status update

Grammar / Pattern

present continuous

คำศัพท์สำคัญ

solder bridging; paste volume, aperture design, placement, and reflow condition

ระดับภาษา

B1 · normal

ใช้ประโยคนี้อย่างไร

Present Continuous ใช้รายงานสิ่งที่กำลังทำอยู่ในขณะนี้ เหมาะกับ Daily Meeting หรือ Chat หน้างาน

พูด/เขียนได้หลายแบบ

FORMAL

Please ensure that the solder bridging is fully verified against the approved requirements for paste volume, aperture design, placement, and reflow condition before release.

CASUAL

Can we check the solder bridging and close the remaining points on paste volume, aperture design, placement, and reflow condition?

ALTERNATIVE

After any change to the solder bridging, run a short verification lot and review SPI/AOI data before returning to normal production.

Grammar Reference

Present Continuous for Current StatusPresent Continuous สำหรับสถานะที่กำลังเกิดขึ้น · Subject + am/is/are + verb-ing Present Continuous for Current StatusPresent Continuous สำหรับรายงานสถานะงาน · Subject + am/is/are + verb-ing Present Simple for Process FactsPresent Simple สำหรับข้อเท็จจริงและขั้นตอนงาน · Subject + base verb(s/es)

แกะรูปประโยค

ใช้ประโยคนี้อย่างไร

พูด/เขียนได้หลายแบบ

Grammar Reference

ประโยคใกล้เคียง

After adjusting the solder bridging, run five boards, compare the SPI/AOI trend with the baseline, and release the line only if the result is stable.

Before the next release, verify the controls for paste volume, aperture design, placement, and reflow condition in the solder bridging.

We found a gap in the solder bridging: one or more controls related to paste volume, aperture design, placement, and reflow condition do not match the approved requirement.

If the solder bridging is not closed before the next build, the unresolved points around paste volume, aperture design, placement, and reflow condition may create a production or quality risk.

We have completed the initial review of the solder bridging and assigned owners for the remaining actions related to paste volume, aperture design, placement, and reflow condition.

Could you clarify how the controls for paste volume, aperture design, placement, and reflow condition will be verified and who will approve the solder bridging?

We would appreciate it if you could provide the latest evidence for the solder bridging, including the status of paste volume, aperture design, placement, and reflow condition, by 3 p.m. today.

For management review, the main open point in the solder bridging is the control of paste volume, aperture design, placement, and reflow condition; the immediate risk is contained, and the team is working toward final closure.