ค้นหา

คำศัพท์ ประโยค บทเรียน และภาษาอังกฤษสำหรับงานจากช่องเดียว

ทั้งหมด ประโยค คำศัพท์บทเรียน Grammar Ref สถานการณ์สัมภาษณ์Email

พบ 80 รายการ

Do not release the DFM review until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release การทบทวน DFMจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · Gerber Release

Do not release the Gerber package until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release ชุดไฟล์ Gerberจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · BOM Control

Do not release the BOM revision until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release BOM Revisionจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · AVL

Do not release the approved vendor list until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release Approved Vendor Listจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · Alternate Component

Do not release the alternate component until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release ชิ้นส่วนทดแทนจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · PCB Revision

Do not release the PCB revision until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release PCB Revisionจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · Stencil Design

Do not release the stencil design until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release การออกแบบ Stencilจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · DFM Review

Before the next release, verify the controls for the pad geometry and component clearance in the DFM review.

ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง รูปแบบ Pad และระยะห่างชิ้นส่วน ในการทบทวน DFM

PCBA Engineering & NPI · Engineering Change

Do not release the engineering change until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release Engineering Changeจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · Gerber Release

Before the next release, verify the controls for the fabrication layers, drill file, and revision in the Gerber package.

ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Layer การผลิต Drill File และ Revision ในชุดไฟล์ Gerber

PCBA Engineering & NPI · New Model Readiness

Do not release the new-model readiness until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

อย่า Release ความพร้อม New Modelจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ

PCBA Engineering & NPI · BOM Control

ค้นหา

Do not release the DFM review until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the Gerber package until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the BOM revision until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the approved vendor list until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the alternate component until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the PCB revision until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Do not release the stencil design until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Before the next release, verify the controls for the pad geometry and component clearance in the DFM review.

Do not release the engineering change until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Before the next release, verify the controls for the fabrication layers, drill file, and revision in the Gerber package.

Do not release the new-model readiness until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.

Before the next release, verify the controls for manufacturer part numbers and approved alternates in the BOM revision.

engineering problem review

engineering change

follow up on engineering change with the supplier

follow up on engineering change with the team

follow up on engineering change before production

follow up on engineering change today

follow up on engineering change

communicate engineering change with the supplier

communicate engineering change with the team

communicate engineering change before production

communicate engineering change today

communicate engineering change

English for Engineering Manager

PCBA English: Engineering Meeting

PCBA English: Production Transfer

PCBA English: Firmware & Software

PCBA English: PFMEA

PCBA English: Trial Production

PCBA English: Stencil Design

PCBA English: AVL

PCBA English: DFM Review

Engineering: Practical Process Parameters

Engineering: Process Parameters Essentials

Engineering: Practical Technical Review

Executive Escalation: real PCBA discussion

Project Review: real PCBA discussion

Management Summary: real PCBA discussion

Supplier Escalation: real PCBA discussion

Customer Meeting: real PCBA discussion

Engineering Meeting: real PCBA discussion

Daily Production Meeting: real PCBA discussion

Shift Handover: real PCBA discussion

Cost Reduction: real PCBA discussion

Production Transfer: real PCBA discussion

Tooling Qualification: real PCBA discussion

Programming Specification: real PCBA discussion

Describe a time when Production, Engineering, and Quality disagreed. How did you handle it?

Describe a time when Production, Engineering, and Quality disagreed. How did you handle it?

Describe a time when Production, Engineering, and Quality disagreed. How did you handle it?

Why should we hire you for this PCBA role?

Which PCBA metrics do you consider important for this role, and why?

Describe a time when Production, Engineering, and Quality disagreed. How did you handle it?

How would you explain a technical issue to senior management?

How do you make sure a corrective action is effective and not just a temporary fix?

What would you do if the production line stopped and shipment was at risk?

Tell me about a difficult PCBA problem you solved. How did you identify the real root cause?

Could you introduce yourself and explain how your experience relates to PCBA manufacturing?

Describe a time when Production, Engineering, and Quality disagreed. How did you handle it?

Engineering Change review request

Changeover readiness

ICT/FCT false-fail escalation

Production delay update

Report BOM mismatch

Verb to be — Engineering

Present Simple — Engineering

Present Continuous — Engineering

Past Simple — Engineering

Present Perfect — Engineering

Future with will — Engineering

Be going to — Engineering

Can and Could — Engineering

Should — Engineering

Must and Have to — Engineering

Articles a an the — Engineering

Countable and Uncountable Nouns — Engineering

Engineering: Drawing & Revision Conversation

Engineering: Drawing & Revision Conversation