I suggest that we quantify the manufacturing risk and propose a design or process countermeasure to control the risk around DFM issue. We can validate the result using defect pareto and trial comparison.

PCBA Engineering & NPIDFM issueB1professional

ผม/ฉันเสนอให้ ประเมินความเสี่ยงการผลิตและเสนอ design/process countermeasure เพื่อควบคุมความเสี่ยงของ ประเด็น DFM และใช้ defect pareto และผลเปรียบเทียบ trial ตรวจยืนยันผล

แกะรูปประโยค

สถานการณ์ / Intent

DFM issue

Grammar / Pattern

Recommendation: I recommend that...

คำศัพท์สำคัญ

comparison, countermeasure, defect, design, issue, manufacturing, pareto, process

ระดับภาษา

B1 · professional

ใช้ประโยคนี้อย่างไร

ใช้เสนอแนวทางพร้อมวิธียืนยันผล

Grammar Reference

Suggest / Recommendการเสนอแนวทางอย่างเป็นมืออาชีพ · suggest/recommend + noun/V-ing; recommend that + subject + base verb Should for RecommendationShould สำหรับข้อเสนอแนะ · Subject + should + base verb Should / Must / Have to: recommendation vs requirementShould / Must / Have to แยกข้อเสนอแนะกับสิ่งที่ต้องทำ · should + base verb / must + base verb / have to + base verb

แกะรูปประโยค

ใช้ประโยคนี้อย่างไร

Grammar Reference

ประโยคใกล้เคียง

Once the agreed action for DFM issue is completed, we can review defect pareto and trial comparison to confirm the result.

Have we completed the agreed action for DFM issue, and what does defect pareto and trial comparison indicate now?

From a management perspective, DFM issue carries this risk: yield loss may continue into mass production. We need defect pareto and trial comparison before committing to a decision.

The next step for DFM issue is to quantify the manufacturing risk and propose a design or process countermeasure. We will confirm the result using defect pareto and trial comparison.

The decision should be supported by defect pareto and trial comparison, not by assumptions.

We are prioritizing DFM issue because it is linked to this risk: yield loss may continue into mass production.

Unless we address DFM issue with the required action, we may continue to face this risk: yield loss may continue into mass production.

Could you help us quantify the manufacturing risk and propose a design or process countermeasure? We also need defect pareto and trial comparison to verify the result.