I suggest that we separate product defects from fixture, equipment, and software causes to control the risk around test false failure. We can validate the result using first-pass yield and retest recovery rate.

PCBA Test & Programmingtest false failureB1professional

ผม/ฉันเสนอให้ แยก defect ของงานออกจากสาเหตุ fixture, equipment และ software เพื่อควบคุมความเสี่ยงของ test false failure และใช้ FPY และ retest recovery rate ตรวจยืนยันผล

แกะรูปประโยค

สถานการณ์ / Intent

test false failure

Grammar / Pattern

Recommendation: I recommend that...

คำศัพท์สำคัญ

causes, defects, equipment, failure, false, first-pass, fixture, from

ระดับภาษา

B1 · professional

ใช้ประโยคนี้อย่างไร

ใช้เสนอแนวทางพร้อมวิธียืนยันผล

Grammar Reference

Suggest / Recommendการเสนอแนวทางอย่างเป็นมืออาชีพ · suggest/recommend + noun/V-ing; recommend that + subject + base verb Should for RecommendationShould สำหรับข้อเสนอแนะ · Subject + should + base verb Should / Must / Have to: recommendation vs requirementShould / Must / Have to แยกข้อเสนอแนะกับสิ่งที่ต้องทำ · should + base verb / must + base verb / have to + base verb

แกะรูปประโยค

ใช้ประโยคนี้อย่างไร

Grammar Reference

ประโยคใกล้เคียง

Once the agreed action for test false failure is completed, we can review first-pass yield and retest recovery rate to confirm the result.

Has the team completed the required action for test false failure? What does the latest evidence from first-pass yield and retest recovery rate show?

From a management perspective, test false failure carries this risk: unnecessary repair and scrap may increase. We need first-pass yield and retest recovery rate before committing to a decision.

For test false failure, our next action is to separate product defects from fixture, equipment, and software causes. We will review first-pass yield and retest recovery rate at the next checkpoint.

The decision should be supported by first-pass yield and retest recovery rate, not by assumptions.

We are prioritizing test false failure because it is linked to this risk: unnecessary repair and scrap may increase.

If we do not complete the required action for test false failure, this risk may remain: unnecessary repair and scrap may increase.

Could you help us separate product defects from fixture, equipment, and software causes? We also need first-pass yield and retest recovery rate to verify the result.