process
ดำเนินการ
ความหมายและการใช้
to handle something through a defined procedure
ตัวอย่างประโยคที่ใช้คำนี้
Before the next release, verify the controls for mix ratio, degassing, fill level, and cure time in the potting process.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง Mix Ratio, Degassing, Fill Level และ Cure Time ในกระบวนการ Potting
Before the next release, verify the controls for quantity by process, aging, hold status, and bottleneck in the WIP control.
ก่อน Release ครั้งถัดไป ให้ตรวจยืนยันการควบคุมเรื่อง จำนวนตาม Process, Aging, Hold Status และ Bottleneck ในการควบคุม WIP
Review the WIP control against plan versus actual, quantify the loss in minutes or pieces, and assign a recovery owner with a clear completion time.
ทบทวนการควบคุม WIPเทียบ Plan กับ Actual ระบุ Loss เป็นนาทีหรือจำนวนชิ้น และกำหนด Recovery Owner พร้อมเวลาปิดที่ชัดเจน
For the IPC-A-610 acceptance, define the affected scope, implement containment, verify the root cause with evidence, and confirm corrective-action effectiveness before closure.
สำหรับเกณฑ์ IPC-A-610 ให้กำหนด Affected Scope ทำ Containment ยืนยัน Root Cause ด้วย Evidence และตรวจ Effectiveness ของ Corrective Action ก่อนปิด
Do not release the trial build until the latest revision, cut-in point, validation evidence, and open risks have been reviewed with the responsible functions.
อย่า Release Trial Buildจนกว่า Revision ล่าสุด จุด Cut-in, Validation Evidence และ Open Risk จะถูกทบทวนร่วมกับหน่วยงานที่รับผิดชอบ
Before starting the next lot, verify the critical parameters in the manual insertion, record the result, and stop the process if any value is outside the approved limit.
ก่อนเริ่ม Lot ถัดไป ให้ Verify Critical Parameter ในการเสียบชิ้นส่วน Manual บันทึกผล และหยุด Process หากค่าใดอยู่นอก Limit ที่อนุมัติ
The team is reviewing the controls for mix ratio, degassing, fill level, and cure time as part of the potting process.
ทีมกำลังทบทวนการควบคุมเรื่อง Mix Ratio, Degassing, Fill Level และ Cure Time ซึ่งเป็นส่วนหนึ่งของกระบวนการ Potting
Before starting the next lot, verify the critical parameters in the lead forming, record the result, and stop the process if any value is outside the approved limit.
ก่อนเริ่ม Lot ถัดไป ให้ Verify Critical Parameter ในการ Form Lead บันทึกผล และหยุด Process หากค่าใดอยู่นอก Limit ที่อนุมัติ
The team is reviewing the controls for quantity by process, aging, hold status, and bottleneck as part of the WIP control.
ทีมกำลังทบทวนการควบคุมเรื่อง จำนวนตาม Process, Aging, Hold Status และ Bottleneck ซึ่งเป็นส่วนหนึ่งของการควบคุม WIP
Before starting the next lot, verify the critical parameters in the wave-solder flux, record the result, and stop the process if any value is outside the approved limit.
ก่อนเริ่ม Lot ถัดไป ให้ Verify Critical Parameter ในFlux ของ Wave Solder บันทึกผล และหยุด Process หากค่าใดอยู่นอก Limit ที่อนุมัติ