TOEIC ชุด 10 · Orders, Shipping & Supplier Reading

A supplier informed the purchasing team that the connector shipment originally planned for Tuesday will leave on Thursday due to a customs inspection. The supplier can send 400 pieces by air first and the remaining 1,600 pieces by the normal route. The buyer must confirm the split-shipment option before 3:00 p.m. today.

A supplier informed the purchasing team that the connector shipment originally planned for Tuesday will leave on Thursday due to a customs inspection. The supplier can send 400 pieces by air first and the remaining 1,600 pieces by the normal route. The buyer must confirm the split-shipment option before 3:00 p.m. today.

A supplier informed the purchasing team that the connector shipment originally planned for Tuesday will leave on Thursday due to a customs inspection. The supplier can send 400 pieces by air first and the remaining 1,600 pieces by the normal route. The buyer must confirm the split-shipment option before 3:00 p.m. today.

A supplier informed the purchasing team that the connector shipment originally planned for Tuesday will leave on Thursday due to a customs inspection. The supplier can send 400 pieces by air first and the remaining 1,600 pieces by the normal route. The buyer must confirm the split-shipment option before 3:00 p.m. today.

All engineers assigned to the new AOI system must complete the online safety module before attending hands-on training next Wednesday. The practical session will start at 9:00 a.m. in Training Room 2. Employees who have not completed the online module will need to join the following month.

All engineers assigned to the new AOI system must complete the online safety module before attending hands-on training next Wednesday. The practical session will start at 9:00 a.m. in Training Room 2. Employees who have not completed the online module will need to join the following month.

All engineers assigned to the new AOI system must complete the online safety module before attending hands-on training next Wednesday. The practical session will start at 9:00 a.m. in Training Room 2. Employees who have not completed the online module will need to join the following month.

All engineers assigned to the new AOI system must complete the online safety module before attending hands-on training next Wednesday. The practical session will start at 9:00 a.m. in Training Room 2. Employees who have not completed the online module will need to join the following month.

A customer audit team will visit the factory on September 18. The opening meeting begins at 8:30 a.m., followed by a line tour and document review. Process owners should close overdue actions and prepare objective evidence by September 16.

A customer audit team will visit the factory on September 18. The opening meeting begins at 8:30 a.m., followed by a line tour and document review. Process owners should close overdue actions and prepare objective evidence by September 16.

A customer audit team will visit the factory on September 18. The opening meeting begins at 8:30 a.m., followed by a line tour and document review. Process owners should close overdue actions and prepare objective evidence by September 16.

A customer audit team will visit the factory on September 18. The opening meeting begins at 8:30 a.m., followed by a line tour and document review. Process owners should close overdue actions and prepare objective evidence by September 16.

The SMT line will be unavailable from 1:00 p.m. to 4:00 p.m. on Saturday while preventive maintenance is performed. Production Planning has moved Model X to the morning shift and asked Material Control to complete kitting by Friday evening.

The SMT line will be unavailable from 1:00 p.m. to 4:00 p.m. on Saturday while preventive maintenance is performed. Production Planning has moved Model X to the morning shift and asked Material Control to complete kitting by Friday evening.

The SMT line will be unavailable from 1:00 p.m. to 4:00 p.m. on Saturday while preventive maintenance is performed. Production Planning has moved Model X to the morning shift and asked Material Control to complete kitting by Friday evening.

The SMT line will be unavailable from 1:00 p.m. to 4:00 p.m. on Saturday while preventive maintenance is performed. Production Planning has moved Model X to the morning shift and asked Material Control to complete kitting by Friday evening.

The weekly project review scheduled for Monday morning has been moved to Tuesday at 2:00 p.m. because the customer will provide updated forecast data on Monday afternoon. Team members should update the risk register before noon on Tuesday.

The weekly project review scheduled for Monday morning has been moved to Tuesday at 2:00 p.m. because the customer will provide updated forecast data on Monday afternoon. Team members should update the risk register before noon on Tuesday.

The weekly project review scheduled for Monday morning has been moved to Tuesday at 2:00 p.m. because the customer will provide updated forecast data on Monday afternoon. Team members should update the risk register before noon on Tuesday.

The weekly project review scheduled for Monday morning has been moved to Tuesday at 2:00 p.m. because the customer will provide updated forecast data on Monday afternoon. Team members should update the risk register before noon on Tuesday.

The company is seeking a Senior Manufacturing Engineer with at least five years of electronics manufacturing experience. The role requires strong problem-solving, customer communication, and new-model launch experience. Candidates who can communicate in English with overseas customers will be given preference.

The company is seeking a Senior Manufacturing Engineer with at least five years of electronics manufacturing experience. The role requires strong problem-solving, customer communication, and new-model launch experience. Candidates who can communicate in English with overseas customers will be given preference.

The company is seeking a Senior Manufacturing Engineer with at least five years of electronics manufacturing experience. The role requires strong problem-solving, customer communication, and new-model launch experience. Candidates who can communicate in English with overseas customers will be given preference.

The company is seeking a Senior Manufacturing Engineer with at least five years of electronics manufacturing experience. The role requires strong problem-solving, customer communication, and new-model launch experience. Candidates who can communicate in English with overseas customers will be given preference.

Finance has not yet received payment for Invoice 7841, which was due on August 25. The customer is asked to confirm payment status or advise if any document is missing. A copy of the invoice and delivery note is attached.

Finance has not yet received payment for Invoice 7841, which was due on August 25. The customer is asked to confirm payment status or advise if any document is missing. A copy of the invoice and delivery note is attached.

Finance has not yet received payment for Invoice 7841, which was due on August 25. The customer is asked to confirm payment status or advise if any document is missing. A copy of the invoice and delivery note is attached.

Finance has not yet received payment for Invoice 7841, which was due on August 25. The customer is asked to confirm payment status or advise if any document is missing. A copy of the invoice and delivery note is attached.

Incoming inspection found a dimensional issue on Lot A2409. The lot has been placed on hold, and production should not use it until Supplier Quality completes verification. The supplier has been asked to provide containment results by tomorrow morning.

Incoming inspection found a dimensional issue on Lot A2409. The lot has been placed on hold, and production should not use it until Supplier Quality completes verification. The supplier has been asked to provide containment results by tomorrow morning.

Incoming inspection found a dimensional issue on Lot A2409. The lot has been placed on hold, and production should not use it until Supplier Quality completes verification. The supplier has been asked to provide containment results by tomorrow morning.

Incoming inspection found a dimensional issue on Lot A2409. The lot has been placed on hold, and production should not use it until Supplier Quality completes verification. The supplier has been asked to provide containment results by tomorrow morning.

The flight for the customer visit has been changed from 7:20 a.m. to 9:10 a.m. The hotel reservation remains unchanged, but the airport pickup must be moved to 11:30 a.m. Travelers should confirm the new itinerary in the travel system.

The flight for the customer visit has been changed from 7:20 a.m. to 9:10 a.m. The hotel reservation remains unchanged, but the airport pickup must be moved to 11:30 a.m. Travelers should confirm the new itinerary in the travel system.

The flight for the customer visit has been changed from 7:20 a.m. to 9:10 a.m. The hotel reservation remains unchanged, but the airport pickup must be moved to 11:30 a.m. Travelers should confirm the new itinerary in the travel system.

The flight for the customer visit has been changed from 7:20 a.m. to 9:10 a.m. The hotel reservation remains unchanged, but the airport pickup must be moved to 11:30 a.m. Travelers should confirm the new itinerary in the travel system.

Yesterday’s output was 620 units against a target of 800 because of an ICT fixture problem. The fixture has been repaired, and the team plans to recover 90 units on each of the next two shifts. Quality will monitor first-pass yield during the recovery.

Yesterday’s output was 620 units against a target of 800 because of an ICT fixture problem. The fixture has been repaired, and the team plans to recover 90 units on each of the next two shifts. Quality will monitor first-pass yield during the recovery.

Yesterday’s output was 620 units against a target of 800 because of an ICT fixture problem. The fixture has been repaired, and the team plans to recover 90 units on each of the next two shifts. Quality will monitor first-pass yield during the recovery.

Yesterday’s output was 620 units against a target of 800 because of an ICT fixture problem. The fixture has been repaired, and the team plans to recover 90 units on each of the next two shifts. Quality will monitor first-pass yield during the recovery.

The quarterly supplier review will focus on delivery performance, recurring defects, and cost-reduction opportunities. Suppliers should submit KPI data and open-action status two working days before the meeting.

The quarterly supplier review will focus on delivery performance, recurring defects, and cost-reduction opportunities. Suppliers should submit KPI data and open-action status two working days before the meeting.

The quarterly supplier review will focus on delivery performance, recurring defects, and cost-reduction opportunities. Suppliers should submit KPI data and open-action status two working days before the meeting.

The quarterly supplier review will focus on delivery performance, recurring defects, and cost-reduction opportunities. Suppliers should submit KPI data and open-action status two working days before the meeting.

The Engineering office will move to Building B on October 3. Employees should label personal equipment by October 1. IT will disconnect desktop computers after 5:00 p.m. on October 2 and reconnect them the next morning.

The Engineering office will move to Building B on October 3. Employees should label personal equipment by October 1. IT will disconnect desktop computers after 5:00 p.m. on October 2 and reconnect them the next morning.

The Engineering office will move to Building B on October 3. Employees should label personal equipment by October 1. IT will disconnect desktop computers after 5:00 p.m. on October 2 and reconnect them the next morning.

The Engineering office will move to Building B on October 3. Employees should label personal equipment by October 1. IT will disconnect desktop computers after 5:00 p.m. on October 2 and reconnect them the next morning.

The document-control system will be offline from 10:00 p.m. Friday until 2:00 a.m. Saturday for a security update. Users should download any controlled documents needed for night-shift production before the outage.

The document-control system will be offline from 10:00 p.m. Friday until 2:00 a.m. Saturday for a security update. Users should download any controlled documents needed for night-shift production before the outage.

The document-control system will be offline from 10:00 p.m. Friday until 2:00 a.m. Saturday for a security update. Users should download any controlled documents needed for night-shift production before the outage.

The document-control system will be offline from 10:00 p.m. Friday until 2:00 a.m. Saturday for a security update. Users should download any controlled documents needed for night-shift production before the outage.

Employees are invited to complete a short cafeteria survey by the end of this week. The Facilities team will use the results to review menu variety, waiting time, and seating capacity. Participants can access the survey through the employee portal.

Employees are invited to complete a short cafeteria survey by the end of this week. The Facilities team will use the results to review menu variety, waiting time, and seating capacity. Participants can access the survey through the employee portal.

Employees are invited to complete a short cafeteria survey by the end of this week. The Facilities team will use the results to review menu variety, waiting time, and seating capacity. Participants can access the survey through the employee portal.

Employees are invited to complete a short cafeteria survey by the end of this week. The Facilities team will use the results to review menu variety, waiting time, and seating capacity. Participants can access the survey through the employee portal.

The NPI team will transfer ownership of Model Z to the mass-production team next Friday. Before handover, all open actions must have owners and due dates, and the latest BOM, process flow, control plan, and test-program list must be uploaded to the project folder.

The NPI team will transfer ownership of Model Z to the mass-production team next Friday. Before handover, all open actions must have owners and due dates, and the latest BOM, process flow, control plan, and test-program list must be uploaded to the project folder.

The NPI team will transfer ownership of Model Z to the mass-production team next Friday. Before handover, all open actions must have owners and due dates, and the latest BOM, process flow, control plan, and test-program list must be uploaded to the project folder.

The NPI team will transfer ownership of Model Z to the mass-production team next Friday. Before handover, all open actions must have owners and due dates, and the latest BOM, process flow, control plan, and test-program list must be uploaded to the project folder.